"Thermal Mass" refers to the ability of a material to retain heat. For instance, a heated stone will remain warm much longer than a block of wood. This is because the stone is denser thereby containing more mass. The mass of the earth can be used as a flywheel when it is heated under a radiant concrete slab. This storage of heat can carry a building through a time when energy is not available. Where "off-peak" electrical rates are offered, using a radiant floor in conjunction with the thermal storage of the earth beneath the slab can produce some very low electric bills.
Thermal mass in a heated shop or hangar floor responds rapidly to the change of air temperature when a big overhead door is opened. All the heat that has been "trickled" into the slab over time is released quickly to combat the cold air rolling in over the floor. This happens because of the sudden, dramatic increase in temperature difference between the slab and the air. Once the door is closed the building returns to its normal comfort setting almost immediately. The key to any radiant panel system is to provide an even surface temperature so some mass is required to spread the heat across the panel. This mass may be in the form of a gypsum or other cementitious material or metal plates in the panel construction.
Some underfloor systems simply rely on air currents within the joist space and the mass of the wood subfloor to spread the heat. When properly designed, these systems are a good alternative for retrofitting an existing building. (return to Menu)
Click Here to contact our Solar and Radiant Division Manager, Bill Spezza for any special requirements, needs or any questions that you may have.
